Welcome to Rocky Mountain Containment. We specialize in providing secondary containment to the industrial and environmental communities. We use the patented ENDURA-FLEX technology to create a seamless, chemically resistant protective coating with a multitude of uses in the Oil & Gas Industry. We also supply and install liners for the Agriculture Industry to be used in sewage lagoons, pond liners, and barn concrete protection.
RMC uses 100% solids spray-on liners which can be applied at temperatures as low as -30ºC and onto any surface in any weather conditions. With a reaction time of 15 seconds and a drying time of 15 minutes RMCs spray on liners are totally cured in 24 hours allowing for minimal down-time. Our products are totally UV resistant which prevents breakdown due to exposure to the suns rays and creates a longer lasting barrier.
Our secondary containment products have been proven to successfully contain Phosphoric acid, Sulfuric acid, and Jp-4 jet fuel, among other chemicals, for up to 164 hours. They are also completely flame resistant and crack resistant in cold weather.
Products
RMC provides many different types of containment. Our products are seamless and spray-on in application to provide the best protection against loss.
ENDURA-FLEX 1990
EF-1990 is a modified polyurethane elastomer used to provide secondary containment for tank farms, fuel dispensers, catch basins, chemical tanks, waste storage, process areas, loading docks, and drum storage. It has also shown itself to be an excellent Rock Shield when applied to Yellow Jacket pipelines before backfilling begins.
EF-1990 provides a seamless chemical resistant liner. EF-1990 can be applied directly to earth, steel, concrete, asphalt, or wood or it can be applied to a geo-textile to provide an easily removable liner. EF-1990 can be injected with a non-slip agent to provide safer walkways and paths as well as recycled rubber for added di-electric strength and impact resistance and chopped fiberglass for additional tensile strength.
Features
- Meets G55 requirements for secondary containment
- Completely UV resistant
- 100% solids polyurethane elastomer
- Designed as an exterior secondary containment coating
- Can be applied over concrete, asphalt, wood, steel or direct to earth
- Can be applied at temperatures as low as -30°C
- Chemical reaction time as low as 11 seconds
- Dry time: 15 to 20 min.
- Curing time: 24 hrs
Physical Properties
Durometer hardness- 90-95
Tensile strength - 1350 psi
Percent elongation - 47.5%
ENDURA-FLEX 1988
EF-1988 is an elastomeric polyurethane compound used primarily on water and wastewater containment. It can be applied to both steel and concrete and is self-priming on both surfaces.
EF-1988 is a multi-component polyurethane that protects against corrosion and abrasion. EF-1988 is chemically inert, while maintaining amazing flexibility and ultraviolet (UV) resistance. EF-1990 can be applied on almost any surface with amazing cohesion.
Features
- Meets G55 requirements for secondary containment
- Designed as an exterior secondary containment coating
- Can be applied over concrete, asphalt, wood, steel or direct to earth
- Can be applied at temperatures as low as -30°C
- Chemical reaction time as low as 11 seconds
- Dry time: 30 to 40 min
- Curing time: 24 hrs
Physical Properties
Durometer Hardness - 85± 5
Tensile Strength - 1360 psi
Elongation - 70%
Impact Resistance (100 mil sample) - No cracking
