The Duckbill Sampling System is used to collect composite samples in water and wastewater. The sampler is intrinsically safe. It can lift samples 60 feet and move them horizontally 100 feet. The sampling lines are blown dry to prevent freezing & clogging.
Features
- No Mechanical Moving Parts
- Low Cost
- Low Maintenance
- Inherently Explosion Proof Remote Sampler
- High Sample Lift
- Tubes Blow Dry
- Clog Resistant Rubber Duckbill
- Samples Timed or Flow Proportional
Additional Features
- A small air pumps along with the sampling system
- Single bottle composite samplers
- 60 feet (20 meters) is the normal maximum lift
- Air Pressure required 15 -35 psig (1 - 2.5 Bar)
- If the sample points are close together a two head `stereo` system is common
Technical Advantages
Using no mechanical moving parts, the Duckbill style pneumatic sampling systems extract wastewater samples with high ejection velocity. Sixty foot sample lifts are possible and pneumatic systems are inherently Explosion Proof. The solid-state control system can be programmed to sample on a time or flow proportional basis or can be in a standby mode awaiting a signal from a flow switch or other remote control device. The rubber Duckbill check valve closes around large particles so that even Raw Sewage can be sampled with minimal maintenance. The patented Duckbill style wastewater and water samplers have 35 years of reliable field service around the world.
Applications
- Wastewater Treatment Plants
- Drinking Water Plants
- Industrial Wastewater Treatment Plants
- Refineries
- Chemical Plants
- Electroplaters
- Circuit Board Manufacturers
- Anywhere a water sample needs to be taken for analysis
