Portable Interface Tape
Spill Checker
The Spill Checker is a hand held, battery powered precision unit for accurately measuring depth to water and thickness of free phase products in tanks or wells. The Spill Checker can be used in a number of applications including measuring oil as thin as1/200 ft (1mm) and water levels in monitoring wells, detecting tank and plumbing leakage and obtaining accurate measurements of ground water levels. It will also detect and measure sinking layers of product (DNAPL). The Clean Earth Spill Checker features two sizes of sensor probes- a standard 5/8`` diameter probe for most applications and a NEW 7/16`` diameter probe which will fit down the newly popular 1/2`` diameter direct push wells. The measuring tape is offered with a rugged Hydrocarbon resistant Kynar jacket. Tapes are highly accurate and certified to federal specification US-GGG-T-106E and European EEC CLASS II.
Spill Checker Features
- Measurement Tape Reads Out In 1/100 Ft Or 1 Mm.
- Clean Earth can provide a 5/8`` diameter probe for standard wells or a 7/16`` diameter probe which will fit in a ½`` diameter push sampling well.
- Factory adjustments can be easily made to improve on speed and false readings in heavy oils or adjusted for a badly damaged optical sensor
- Kynar jacketed tapes provide the toughest, chemically resistant tapes in the industry while maintaining the highest accuracy available.
- The unit is intrinsically safe.
- Tapes meet or exceed federal specifications US GGG-T-106E (USA) or EEC class II (Europe) for a guaranteed accuracy of 0.008 %
- 1 year warranty against manufacturer’s defects on all parts (excluding failure of the tape due to wear)
Specifications of the Spill Checker
Size: 12.5`` wide x 9`` deep x 14.25`` high (317 x 229 x 362 mm)
Weight: 12 Lbs (5.8 kg) with a 100 foot tape. Weight varies with the length of tape ordered
Operating Principle: Water sensing: Conductivity
Hydrocarbons: Infra-Red Refraction
Tape Length: 100 ft. OR (30 meters) are standard off-the-shelf-units (Please specify English or Metric when ordering). Longer or shorter tapes (50’ to 2000’) available with special order
Tape Repeatability: Tape's accuracy complies with US-GGG-T-106E
Power: Power is from a single 9 volt battery
Tape Material: Kynar
Probe Diameters: 6.5`` long x 5/8`` or 7/16`` diameter
Probe Holder: Holds and protects probe when not in use
Operating temperature: 0º to 130º F ambient temperature (-18º to 55º C)
