Clean Earth Technology is a manufacturer and worldwide distributor of groundwater remediation equipment. Since 1990, our equipment has been used to efficiently recover hazardous materials (LNAPL and DNAPL) from underground water tables. Free product skimming has never been easier, more reliable, or more cost effective. Our unique technology allows you to pump only the contaminant, leaving the water behind for in-ground treatment. Our systems feature:
- Quick, easy installation
- Small above ground “footprint”- unobtrusive and quiet operation
- Operating temperatures of –40 to +60 degrees Celsius
- High average product recovery rates
- Inexpensive Operation & Maintenance costs
- Low cost per unit of product recovered
- Energy efficient- use less power than a 100 watt light bulb
Clean Earth Technology maintains a strong commitment to excellent product service and field support. This means that we set the same high standards of quality, precision and reliability on our after-sales service as we do on our products. Our customer service features:
- Phone field support to help customers to get systems up and running
- Phone field support to help users to solve site-specific problems, when encountered
- Phone support to trouble-shoot system problems. We can often isolate problems to a single system module to identify service needs.
- On site assistance with system installations when requested
- On site trouble-shooting of systems when requested
- Repair estimates can be provided upon equipment return
- Warranty issues handled promptly
Petroleum Contamination Pumping System
Magnum Spill Buster-Dedicated, Automatic, Free Product Recovery System
The Magnum Spill BusterTM is an advanced, automated, free phase petroleum contamination pumping system. It is specifically designed to remove floating petroleum product (LNAPL) from the water table via a 2`` or larger diameter well. The unique auto-seeking device allows the pump intake to automatically follow the elevation of the oil/water interface as it fluctuates. This is very useful in areas where the water table elevation fluctuates often. The Magnum Spill Buster will not pump water. The system can also be easily configured to recover heavier-than-water (DNAPL) contaminants. Water depression operation can be added with the addition of a Water Depression Control Module and a Grundfos Redi-Flo 3 environmental water pump.
The Magnum consists of three interactive modules: the control box, the probe, and the auto seeker.
The Magnum Spill Buster Control Box is a processor based control system that coordinates and displays system operations. The control box features a connector ``pouch`` which provides easy access to control cable hookups, control parameter settings, and 12/24 VDC or 120/240 VAC 50/60 Hz input power hookups. The control box also provides an RS-485 communications port for connection to up to 31 other units and a personal computer (PC) up to 3,000 ft. away.
The Magnum Spill Buster Probe is 1.93 inches in diameter and features our Alpha-ArrayTM Interface Sensor to detect the water/ product interface. This sensor is a multiple field array, all solid state, monolithic, noncontact, fluid-interface sensor that is a spin-off of spacecraft fuel gauging developed for NASA. The use of this interface sensor in the environmental industry is unique. Since it is a noncontact sensor, it is highly immune to fouling, which is a problem with virtually all other types of sensing methods (including conductive, float, optical and even radio frequency methods). The product pump is a powerful 12vdc unit originally developed for the diesel truck market and much modified to withstand its use with the dirty and degraded products found in recovery wells.
The Auto Seeker is a small, motorized reel assembly located at the top of the wellhead. It automatically raises and lowers the probe to follow the product interface and is only limited by the length of the cable. This makes the system operation highly efficient even with large changes in the level of the ground water. The cable fully reels onto the Auto Seeker, allowing the system to freely operate in a vault as small as 24`` x 24`` x 22`` deep.
Magnum Spill BusterTM features
- Low profile Auto Seeker motorized reel system allows installation in smaller well head spaces and prevents cable tangling
- The system can be used with ``floaters`` (LNAPLs) or ``sinkers`` (DNAPLs) with a minor adjustment to the control box
- Water depression can be added to the system with our Water Depression Module and water pump
- New ``slimline`` connectors for the cable ends are extremely rugged and easy to clean
- Plastic enclosure with connector ``pouch`` provides easy access to the cables, adjustable controls, and AC wiring
- True 24 VDC battery/solar panel operation is available even for deep wells
Magnum Spill Buster Specifications
Complete Magnum Spill Buster System Includes: Magnum Spill Buster Control Box, Magnum Spill Buster Probe with 50 foot cable, Auto Seeker with 25' cable, Tank Shutoff Probe with 25' cable, and 50’ nylon discharge tubing.
Input Power: 115 VAC or 230 VAC, 100 watts max. or 24 VDC, 75 watts max. with optional battery cable and deep discharge batteries.
Operating Temperature Range: -40 to +140 degrees F or -40 to +60 degrees C
Pumping Rate: Up to 45 GPH (175 LPH) @ 0 PSI (Zero depth and no discharge back pressure.) or Up to 15 GPH (57 LPH) @ 50 PSI (50' deep and 25 PSI discharge back pressure.)
Standard Well Depth: 50' max.
Maximum Well Depth: 100' on special order with 100' down-well cable.
Minimum Well Head Clearance for AUTO SEEKER
24" L x 24" W x 22" D
Probe Dimensions: 1.93" dia. x 16" long (cable dia. including the discharge tube is 0.5") Standard Probe cable length is 50'.
Control Box: 14" wide x 23" high x 6" deep. An additional 10" is required below for cable exit and an additional 14" is required in front and to the left for door swing.
Standard Cable Length: 25' from Control Box to well head.
Product Tank Probe: Threads into a standard 2" barrel bung. Standard cable length is 25 ft.
Total System Weight: 68 lbs.
Optional Equipment: Immediate Response Box for quick field installations. Optional cable extension lengths: 50', 75' and 100' from Control Box to well head, Complete Solar Panel Charging System (24 Vdc), Spare product pumps, Battery cables, Custom requirements, Water depression control module, Grundfos water depression pumps with NEC fittings, 5 to 2000 gpm. Network Software for central PC - operate up to 32 Magnum Spill Bustertm systems at one time with RS-485 repeaters for long well-to-well distances.
