Pocket Colorimeters
POCKET COLORIMETER TYPE II
Hach has enhanced its proven pocket colorimeter concept still further - with new features for more flexible and convenient use.
New Features Includes:
- easy to operate with only 3 keys
- watertight for up to 30 minutes at a depth of 1m
- backlit for clearer readings
- up to 2000 tests per battery set
- wider measuring ranges for many parameters
Rugged Construction: A tough impact-resistant shell protects the electronics and optics and ensures years of trouble free operation
Water Proof: The IP67 rating means the unit can stay submerged at 1 metre for 30 minutes and still function properly. And it floats!!
Better Optics: The improved optical system allows for expanded ranges for ammonia, chlorine, chromium, copper, iron and molybdenum
UNICELL CUVETTE TEST
UniCell Cuvette Tests allow convenient, in-facility measurement of key quality indicator components in water and waste water. Using the included blanking vial and a direct-reading spectrophotometer or colorimeter, it couldn`t be easier to complete accurate tests (less than 20 minutes for most parameters). UniCell Cuvette Tests use an innovative method to deliver powder reagent into the sample vial. The reagent is pre-measured and packed directly in the test vial caps - just screw the cap onto the vial and shake. The capped vial also contains all waste after testing, for clean and safe disposal. Some tests require additional reagents and not all use UniCap™ reagents.
DRB100 Reaction Block: The DRB100 block is specifically designed for the UniCell Cuvette Tests parameters Total Phosphate, Total Nitrogen and metals. Two separately controlled heating blocks enable digestions to be carried out in parallel at different temperatures (100?C and 148°C) and for different periods (30, 60, 120 and 240 minutes).
Metal digestion set for sample preparation: The analysis of metals in wastewater is one of the strong points of the UniCell Cuvette Tests system. The metal digestion set is specially geared to sample preparation for the UniCell Cuvette Tests. It enables complexed metals to be quantitively analysed - the decisive step for precise and meaningful analysis of metals in wastewater samples.
Conductivity Standards
- Fully traceable, all values are directly traceable to NIST Certified Reference Material
- Certified accuracy of ±1%
- Guaranteed stability
- Matrix matched
- USP 24 compliant values
- Includes Certificate of Analysis, detailing test method used, result of test, traceability information, lot number, expiry date, Measurement of Uncertainty Data
- Temperature dependence data, lot number and expiry date are printed on product label
Portable Conductivity Meters
HANDYLAB PORTABLE CONDUCTIVITY METERS
Battery operated Portable Conductivity Meters suitable for measuring conductivity, total dissolved solids (TDS), salinity and temperature. Robust waterproof housing is particularly suited to on-site applications. Uses either 2-pole or 4-pole measuring cells, both have integrated temperature sensor.
The Handylab LF12 Portable Conductivity Meter includes data storage and RS232 interface. The measurements can be recorded onsite for later evaluation on a PC. An optional mains power supply unit is available for this model.
LUMINESCENT DISSOLVED OXYGEN METER
Advantages of the portable Hach Luminescent Dissolved Oxygen probe and meters
These Luminescent Dissolved Oxygen Meters offer several key advantages over meters based on galvanic or polarographic sensor technology, saving you time and money as well as increasing your confidence in Dissolved Oxygen measurements.
- no membranes means improved data quality and less hassle
- no chemical interference from typical wastewater chemicals, withstands harsh
- wastewater applications
- less maintenance than traditional Dissolved Oxygen probes, means time savings and lower
- cost of ownership
- factory calibrated Dissolved Oxygen sensor, no user-calibration required for the life of the sensor
- no polarisation time, simply turn on the meter and you are ready to go
- easy probe maintenance, no electrolyte to replace, no cathodes/anodes to polish
- fast response, with minimal stirring required
- durable sensor retains accuracy even when scratched or partially fouled, can easily be cleaned
- 3 year warranty on probe and meter, 1 year warranty on sensor caps
Spares and Accessories
- Colour Comparator
- Dr/2500 Water Analysis Scanning Spectrophotometer
- Lamp Assemblys
- Accuvac Ampoules (see below)
ACCUVAC AMPOULES
The ultimate in convenience, quality and stability: Proven-formulation powder reagents, vacuum-sealed in optical-quality glass ampoules. No opening tools, no measuring, no mixing caps, no clean-up. Direct-reading results Read out results in mg/L with Hach`s handheld colorimeters, pocket colorimeter, or with the DR/2010, DR/4000 and Odyssey spectrophotometers.
Economical testing: Automated manufacturing provides low-cost testing with each disposable ampoule containing a premeasured amount of quality-assured stable reagent so there is no clean-up or calibration.
Accurate testing Hach`s most popular formulations (many EPA-approved) in a 25mm AccuVac Ampoule offers sensitivity as a single-use sample cell and eliminates the potential for cross contamination.
More Water and Environmental Monitoring Products by Camlab:
-
Reagents & Chemicals
-
Flocculation Jar Testers
-
Test Kits
-
pH & Test Papers
-
Multiparameter Meters
