MWH Labs has been providing bromate analysis by method 317. This method is generally free from the positive or negative interferences associated with method 300.1, the ...

Application

Bromate analysis by method 317, is an ultra-sensitive method used to detect bromate at sub-part per billion levels.

MWH Labs provides comprehensive analytical support for Initial Distribution System Evaluation (IDSE) monitoring. High capacity for both HAA and THM analysis, to ensure that you can ...

Application
Initial Distribution System Evaluation (IDSE) is used for drinking water analysis.

Organic contaminant tests performed include 504 (EDB/DBCP), 505 (Pesticides), 524 (Volatiles), 515 (Herbicides), 525 (SOCS and Pesticides), 531 (Carbamates), 547 (Glyphosate) , 548 (Endothall), and 549 ...

Application

The SDWA Phase II/V (Phase 2/Phase 5) regulations are used to conduct drinking water compliance testing for VOCs and SOCs.

MWH Labs provides analysis of MIB and Geosmin in potable water samples using solid phase micro-extraction (SPME). MWH has been performing MIB-Geosmin analysis for clients across the ...

Application

This ultra sensitive method allows you to obtain analytical results in the low part per trillion (ppt) range, below the odor threshold for these two chemicals. ...

MWH was the first laboratory to submit a data package for UCMR2 testing. We are prepared to support you for all of the required UCMR2 methods, ...

Application

MWH Labs provides comprehensive analytical support for the Unregulated Contaminant Monitoring Regulation (UCMR2).