Monitors and Samplers: Ambient Gas Monitoring, Ambient Particulate Monitors & Samplers and Gas Detection and Monitoring
Ambient Particulate Monitors & Samplers
Automated PM Monitors TEOM® Series 1400a Ambient Particulate Monitor The TEOM Series 1400a Ambient Particulate Monitor is the choice of air pollution monitoring networks worldwide to measure particulate mass concentrations continuously. The system has become the de facto standard for particulate mass concentration measurements in areas such as Canada, Hong Kong, the United Kingdom and France due to its high data quality, reliability and unparalleled support. The instrument incorporates the patented tapered element oscillating microbalance, a micro weighing technology that provides true mass measurements. Features: FilterBased Mass Measurement Unique Principle of Operation Unsurpassed ShortTerm Precision Complete Outdoor Enclosure Quality Assurance Regulatory Approvals Series 8400S Ambient Particulate Sulfate Monitor The Series 8400S Ambient Particulate Sulfate Monitor provides time resolved quantitative measurements of the particulate sulfate contained in suspended fine particulate matter (PM-2.5). In its standard operational setting, the instrument generates a new particulate sulfate measurement in micrograms per cubic meter (µg/m³) every ten minutes. It is a rack-mountable, automated monitor designed for continuous, unattended operation in air quality monitoring stations. Ambient particulate sulfate can represent a large fraction of the PM-2.5 mass concentration in areas that combust fuels that result in sulfur dioxide (SO2) emissions. Series 8400N Ambient Particulate Nitrate Monitor The Series 8400N Ambient Nitrate Particulate Monitor provides time resolved quantitative measurements of the particulate nitrate contained in suspended fine particulate matter (PM-2.5). In its standard operational setting, the instrument generates a new particulate nitrate measurement in micrograms per cubic meter (µg/m³) every ten minutes. It is a rack-mountable, automated monitor designed for continuous, unattended operation in air quality monitoring stations. The Series 8400 unit incorporates a patent- pending, direct measurement principle developed by Aerosol Dynamics, Inc. The methodology has proven itself in a variety of field measurement programs, and has been the subject of numerous peer-reviewed scientific articles. The default 10 minute instrument cycle is made up of an 8 minute sample collection period followed by a 2 minute analysis phase. Automated PM Trending Monitors DataRAM 4TM The DataRAM 4TM continuously monitors and logs the real-time concentration and median particle size of airborne dust, smoke, mist and fumes. In addition, air temperature and humidity are displayed and recorded. With appropriate particle discriminators, it provides measurements correlated with PM10, PM2.5, PM1.0, and reparable fractions. Its patented two-wavelength particle detection system provides the volume median particle diameter of the sampled aerosol, over a concentration range up to 400 mg/m3. The DataRAM 4TM monitors the concentrations of fine particulates in ambient air by a combination of aerodynamic size pre selection, two wavelength nephelometry, and concurrent sensing / correction for relative humidity. DustScan Sentinel® Aerosol Monitor (Model 3030) The DustScan Sentinel Model 3030 Aerosol Monitor is a small monitoring system in a weather-protective enclosure for assessing the concentration of particulate matter (PM) in ambient air. Because it collects and stores information in real time, it is an ideal trending tool. The device can be used for short-term monitoring projects as well as at fixed air monitoring sites. Its data storage and transmission capabilities make it convenient to retrieve field information. The ability to run off of internal batteries for over 48 hours or on solar power provides sitting capabilities independent of the power grid. Features: Two Instruments in One Input/Output Capabilities Light Scattering Technology Inlet Performance PM Samplers Mini-Partisol® Model 2100 Air Sampler The Mini-Partisol Model 2100 Air Sampler is a small, battery-, solar- or AC powered sampling platform for indoor or outdoor particulate matter (PM) and/or gas sampling applications. It is designed for use with a variety of collection hardware. The device has many features in common with the other members of the Partisol® Family of Air Samplers, such as ActiVol flow control, a wind vane/anemometer connection, and conditional sampling. The sampler is quiet enough to be used indoors and rugged enough to withstand outdoor conditions. Features: Flexible System Configuration Rugged, Quiet and Compact Filter Sampling Configuration Speciation Sampling Configuration Data Handling Capabilities Size-Selective Inlets Partisol®-Plus Model 2025 Sequential Air Sampler The Partisol-Plus Air Sampling System defines the state of the art in flexible, field proven sequential air sampling. The device exchanges 47 mm diameter sample filters automatically by a user-defined time interval or other condition. It has a capacity of 16 filter cassettes, allowing for two weeks of unattended daily sampling of particulate matter (PM). The system forms the backbone of the USEPA PM-2.5 national sampling network, and is being implemented by air monitoring organizations worldwide for the sampling of PM- 10, PM-2.5, PM-1 and TSP onto 47 mm diameter filters. Features: Regulatory Approvals System Configuration Sample Integrity and Filter Handling Active Volumetric Flow Control and Audit/Calibration Data Input Features and Sample Programming Size-Selective Sampling Data Handling
TEOM® Series 1400a Ambient Particulate Monitor
The TEOM Series 1400a Ambient Particulate Monitor is the choice of air pollution monitoring networks worldwide to measure particulate mass concentrations continuously. The system has become the de facto standard for particulate mass concentration measurements in areas such as Canada, Hong Kong, the United Kingdom and France due to its high data quality, reliability and unparalleled support. The instrument incorporates the patented tapered element oscillating microbalance, a micro weighing technology that provides true mass measurements.
Features:
Series 8400S Ambient Particulate Sulfate Monitor
The Series 8400S Ambient Particulate Sulfate Monitor provides time resolved quantitative measurements of the particulate sulfate contained in suspended fine particulate matter (PM-2.5). In its standard operational setting, the instrument generates a new particulate sulfate measurement in micrograms per cubic meter (µg/m³) every ten minutes. It is a rack-mountable, automated monitor designed for continuous, unattended operation in air quality monitoring stations. Ambient particulate sulfate can represent a large fraction of the PM-2.5 mass concentration in areas that combust fuels that result in sulfur dioxide (SO2) emissions.
Series 8400N Ambient Particulate Nitrate Monitor
The Series 8400N Ambient Nitrate Particulate Monitor provides time resolved quantitative measurements of the particulate nitrate contained in suspended fine particulate matter (PM-2.5). In its standard operational setting, the instrument generates a new particulate nitrate measurement in micrograms per cubic meter (µg/m³) every ten minutes. It is a rack-mountable, automated monitor designed for continuous, unattended operation in air quality monitoring stations. The Series 8400 unit incorporates a patent- pending, direct measurement principle developed by Aerosol Dynamics, Inc. The methodology has proven itself in a variety of field measurement programs, and has been the subject of numerous peer-reviewed scientific articles. The default 10 minute instrument cycle is made up of an 8 minute sample collection period followed by a 2 minute analysis phase.
DataRAM 4TM
The DataRAM 4TM continuously monitors and logs the real-time concentration and median particle size of airborne dust, smoke, mist and fumes. In addition, air temperature and humidity are displayed and recorded. With appropriate particle discriminators, it provides measurements correlated with PM10, PM2.5, PM1.0, and reparable fractions. Its patented two-wavelength particle detection system provides the volume median particle diameter of the sampled aerosol, over a concentration range up to 400 mg/m3. The DataRAM 4TM monitors the concentrations of fine particulates in ambient air by a combination of aerodynamic size pre selection, two wavelength nephelometry, and concurrent sensing / correction for relative humidity.
DustScan Sentinel® Aerosol Monitor (Model 3030)
The DustScan Sentinel Model 3030 Aerosol Monitor is a small monitoring system in a weather-protective enclosure for assessing the concentration of particulate matter (PM) in ambient air. Because it collects and stores information in real time, it is an ideal trending tool. The device can be used for short-term monitoring projects as well as at fixed air monitoring sites. Its data storage and transmission capabilities make it convenient to retrieve field information. The ability to run off of internal batteries for over 48 hours or on solar power provides sitting capabilities independent of the power grid.
Mini-Partisol® Model 2100 Air Sampler
The Mini-Partisol Model 2100 Air Sampler is a small, battery-, solar- or AC powered sampling platform for indoor or outdoor particulate matter (PM) and/or gas sampling applications. It is designed for use with a variety of collection hardware. The device has many features in common with the other members of the Partisol® Family of Air Samplers, such as ActiVol flow control, a wind vane/anemometer connection, and conditional sampling. The sampler is quiet enough to be used indoors and rugged enough to withstand outdoor conditions.
Partisol®-Plus Model 2025 Sequential Air Sampler
The Partisol-Plus Air Sampling System defines the state of the art in flexible, field proven sequential air sampling. The device exchanges 47 mm diameter sample filters automatically by a user-defined time interval or other condition. It has a capacity of 16 filter cassettes, allowing for two weeks of unattended daily sampling of particulate matter (PM). The system forms the backbone of the USEPA PM-2.5 national sampling network, and is being implemented by air monitoring organizations worldwide for the sampling of PM- 10, PM-2.5, PM-1 and TSP onto 47 mm diameter filters.
Speciation Monitors & Samplers
Series 5400 Ambient Carbon Particulate Monitor The Series 5400 Ambient Carbon Particulate Monitor is an automatic speciation analyzer of suspended particulate matter. It performs measurements of the elemental and organic carbon contained in suspended particulate matter at averaging times as short as one hour. Its thermal-CO2 analysis technique is similar to that used in many analytical laboratories to measure carbon particulate concentration. Using a direct thermal-CO2 technique patented by Thermo, the instrument differentiates between organic and elemental carbon particulate matter by oxidizing collected samples at an intermediate temperature and at a high final burn temperature. When operated at a two-hour cycle, the user can set up the monitor to perform up to three sample oxidations at intermediate temperatures prior to the final burn. Features: Regulatory Designations Measurement Results Calibration and Maintenance Data Handling Sample Inlets ChemVol® High Volume Cascade Impactor The ChemVol Model 2400 High Volume Cascade Impactor is a high volume sampling device that simultaneously collects numerous particle size fractions from ambient air. Multiple sampler stages permit the classification of ambient particulate matter (PM) into its coarse, fine, accumulation and ultra fine modes over short (multiple hour) or multi-day collection periods. Particulate matter in different size ranges is impacted onto a polyurethane foam (PUF) substrate. The collection surface is inert, prevents particle bounce, provides a high mass loading capacity, and is easily removable. The PUF material and the collected particulate matter are removed from the sampler, and the particles are analyzed in a laboratory. Features: Major System Components Sampler Configuration Particle Collection Mechanism Passive Samplers Radiello® Model 3310 Passive Sampling System The Radiello Passive Sampling System provides an effective means of sampling gases for industrial, indoor, outdoor, and personal exposure applications. As a passive sampler, the device does not require any electric power. Its light weight and small size, high and constant sampling rate, and well-documented sampling and analytical procedures make it the ideal platform for determining gaseous concentrations (see list of sampled gases). The Radiello system contains a patented geometry developed by the Fondazione Salvatore Maugeri of Padova, Italy, that results in very high selectivity and sensitivity, and gas sampling rates. The Radiello system is included in the ISO 16200-2 standard for the sampling and analysis of volatile organics, and has played a major role in a number of major international projects for assessing the concentration of benzene and ozone precursors. Features: Sampling and Analysis In-Field Sampler Preparation ChemPass® Model 3400 Personal Sampling System The ChemPass Model 3400 Personal Sampling System is a modular device that provides high-quality samples of multiple pollutants simultaneously. It can provide valuable personal and indoor exposure information on concentrations of particulate matter (PM) and related pollutants. Such detailed information is generally not obtainable from monitors housed in conventional air quality monitoring stations. Configured as a multi-component system, the ChemPass unit contains six sampling devices connected to a high capacity battery-powered pump, all attached to a belt-and-suspenders mounting system. Single-pollutant configurations are also available in which a single PM-2.5 or PM-10 sampler is attached to a pump operating at 4 l/min. The sampling apparatus is worn in an individual’s breathing zone to ensure representative sampling. The pump located on an individual’s mounting belt provides the vacuum necessary to support the four active sampling devices contained in the multi-component system. Beta Absorption Particulate Monitors FH 62 C14 Series Continuous Ambient Particulate Monitor The FH 62 C14 Continuous Ambient Particulate Monitor measures the mass concentration of suspended particulate matter (e.g., TSP, PM10, PM2.5, PMC and PM1) by use of beta attenuation. In addition, the ambient radioactive influence of natural Radon (Rn-222) gas is measured as a refinement step toward better sensitivity at lower ambient particulate concentrations. Features: New technology that provides continuous "real-time" measurement by a C14 monitor Radon gas activity measurement eliminates interference of natural airborne radioactivity Control and data exchange over two serial interfaces possible Storage of half-hour average concentrations over a whole year User selectable reporting of mass concentration based on standard or actual flow rate Processor controlled calibration of all sensors Insensitive to vibration and diurnal temperatures
Series 5400 Ambient Carbon Particulate Monitor
The Series 5400 Ambient Carbon Particulate Monitor is an automatic speciation analyzer of suspended particulate matter. It performs measurements of the elemental and organic carbon contained in suspended particulate matter at averaging times as short as one hour. Its thermal-CO2 analysis technique is similar to that used in many analytical laboratories to measure carbon particulate concentration. Using a direct thermal-CO2 technique patented by Thermo, the instrument differentiates between organic and elemental carbon particulate matter by oxidizing collected samples at an intermediate temperature and at a high final burn temperature. When operated at a two-hour cycle, the user can set up the monitor to perform up to three sample oxidations at intermediate temperatures prior to the final burn.
ChemVol® High Volume Cascade Impactor
The ChemVol Model 2400 High Volume Cascade Impactor is a high volume sampling device that simultaneously collects numerous particle size fractions from ambient air. Multiple sampler stages permit the classification of ambient particulate matter (PM) into its coarse, fine, accumulation and ultra fine modes over short (multiple hour) or multi-day collection periods. Particulate matter in different size ranges is impacted onto a polyurethane foam (PUF) substrate. The collection surface is inert, prevents particle bounce, provides a high mass loading capacity, and is easily removable. The PUF material and the collected particulate matter are removed from the sampler, and the particles are analyzed in a laboratory.
Radiello® Model 3310 Passive Sampling System
The Radiello Passive Sampling System provides an effective means of sampling gases for industrial, indoor, outdoor, and personal exposure applications. As a passive sampler, the device does not require any electric power. Its light weight and small size, high and constant sampling rate, and well-documented sampling and analytical procedures make it the ideal platform for determining gaseous concentrations (see list of sampled gases). The Radiello system contains a patented geometry developed by the Fondazione Salvatore Maugeri of Padova, Italy, that results in very high selectivity and sensitivity, and gas sampling rates. The Radiello system is included in the ISO 16200-2 standard for the sampling and analysis of volatile organics, and has played a major role in a number of major international projects for assessing the concentration of benzene and ozone precursors.
ChemPass® Model 3400 Personal Sampling System
The ChemPass Model 3400 Personal Sampling System is a modular device that provides high-quality samples of multiple pollutants simultaneously. It can provide valuable personal and indoor exposure information on concentrations of particulate matter (PM) and related pollutants. Such detailed information is generally not obtainable from monitors housed in conventional air quality monitoring stations. Configured as a multi-component system, the ChemPass unit contains six sampling devices connected to a high capacity battery-powered pump, all attached to a belt-and-suspenders mounting system. Single-pollutant configurations are also available in which a single PM-2.5 or PM-10 sampler is attached to a pump operating at 4 l/min. The sampling apparatus is worn in an individual’s breathing zone to ensure representative sampling. The pump located on an individual’s mounting belt provides the vacuum necessary to support the four active sampling devices contained in the multi-component system.
FH 62 C14 Series Continuous Ambient Particulate Monitor
The FH 62 C14 Continuous Ambient Particulate Monitor measures the mass concentration of suspended particulate matter (e.g., TSP, PM10, PM2.5, PMC and PM1) by use of beta attenuation. In addition, the ambient radioactive influence of natural Radon (Rn-222) gas is measured as a refinement step toward better sensitivity at lower ambient particulate concentrations.
Ambient Gas Monitoring
Ambient Gas Analyzers Model 42i NO-NO2-NOX Analyzer The industry’s new best-of-breed, the new iSeries platform delivers on all counts - and then goes a step farther. The flagship product in Thermo’s new iSeries product line is the Model 42i NONO2- NOX analyzer. Using chemiluminescence technology, the Model 42i measures the amount of nitrogen oxides in the air from sub-ppb levels up to 100ppm.The Model 42i is a single Chamber, single photomultiplier tube design that cycles between the NO and NOX modes. The 42i has independent outputs for NO, NO2, and Nox and each can be calibrated separately. Dual range and Auto range are standards features as well. If required, the instrument can be operated continuously in either the NO or NOX modes allowing for response times of less than 5 seconds. This state-of-the-art gas analyzer offers features such as an Ethernet port as well as flash memory for increased data storage. Features: Ethernet connectivity for efficient remote access Enhanced user interface with one button programming and large display screen Flash memory for increased data storage and user downloadable software Enhanced electronics design optimizes product commonality Improved layout for easier accessibility to components Model 55C Direct Methane, Non-Methane Analyzer Direct measurement always produces the most precise result. That’s why the Thermo Environmental Instruments’ Model 55C Methane, Non-Methane hydrocarbon Analyzer is designed to provide a direct measurement of both methane and non-methane Hydrocarbon (NMHCs). Unlike instruments that use scrubbers or catalysts to measure only methane and total hydrocarbons, the Model 55C back-flushed gas chromatography system allows reliable measurements of NMHCs at sub-ppm concentrations, even in the presence of much higher concentrations of methane. Features: Complete Separation of Methane from all C2 compounds Automatic Span Check Flame out sensor and automatic re-ignition TEI "C" series compatibility Analog outputs for CH4, NMHC, THC and detector signal Automatic Calibration Model 450CPulsed Fluorescence H2S-SO2 Analyzer The Fluorescence H2S-SO2 Analyzer provides continuous monitoring, superior zero stability and is self contained. Simultaneous readings of H2S and SO2 are provided on a local display and via analog and serial outputs. Minimum detectable concentrations are achieved through the superior optical system in this highly reliable instrument. From refineries to land fills, the Model 450C is the only choice to meet your continuous monitoring needs. The long proven pulsed fluorescent design of this instrument provides the most reliable data capture in its field. Features: Field programmable ranges Long life – stable UV source nominal life over two years MTBF = two years (except for pump) Temperature stabilized reaction chamber Excitation intensity stabilization Modular electronic design Pulsed excitation UV lamp diagnostic Electronic test pulse diagnostic Maintenance diagnostic RS-232 interface Calibration Tools Model 111 Zero Air Supply The Thermo Environmental Model 111 Zero Air Supply is a convenient system for the generation of pollutant free "zero" gas for NO-NOX-O3-SO2-CO and hydrocarbon requirements. The Model 111 uses an external compressor; the pressure regulators, chemical scrubbers, reactor and temperature controller are all contained in a single convenient case. The Model 111 has been designed for any application where pollutant free levels of NO- NOX-O3-SO2-CO and hydrocarbons are required, with flows up to 20 liters per minute at pressure of 30 psi. Model 49i-PS Ozone Primary Standard The new iSeries platform delivers on all counts – and then goes a step farther. One of the critical calibration accessories in Thermo’s new iSeries product line is the Model 49i-PS O3 primary standard. Using UV Photometric technology, the Model 49i-PS is able to produce ozone at a rate of up to 5000 ppb. The Model 49i-PS is a dual cell photometer, the concept adopted by the NIST for the national ozone standard. The Model 49i-PS can operate with ozonator flow rates of up to 6 liters a minute. Because the instrument has both sample and reference flowing at the same time a response time of 20 seconds can be achieved. Features Ethernet connectivity for efficient remote access Enhanced user interface with one button programming and large display screen Flash memory for increased data storage and user downloadable software Enhanced electronics design optimizes product commonality Improved layout for easier accessibility to components EPM Dilution Systems & Probes Model 41c Trace Level Gas Filter Correlation Analyzer Co2 The Model 41C Trace Level Gas Filter Correlation (GFC) CO2 Analyzer measures sub ambient levels of CO2 concentrations. It combines proven detection technology, easy to use menu-driven software, and advanced diagnostics to offer unsurpassed flexibility and reliability. The Model 41C Trace Level is based on the principle that carbon dioxide (CO2) absorbs infrared radiation. Because infrared absorption is a nonlinear measurement technique, it is necessary for the instrument electronics to transform the basic analyzer signal into a linear output. The analyzer uses an exact calibration curve to accurately linearize the instrument output over any range up to a concentration of 2000 ppm. Features: Gas Filter Correlation Selectivity Electronic Diagnostic Transducers Multi-Line Alpha Numeric Display Dedicated Communications Processor Remote Performance Diagnostics Self Aligning Optics
Model 42i NO-NO2-NOX Analyzer
The industry’s new best-of-breed, the new iSeries platform delivers on all counts - and then goes a step farther. The flagship product in Thermo’s new iSeries product line is the Model 42i NONO2- NOX analyzer. Using chemiluminescence technology, the Model 42i measures the amount of nitrogen oxides in the air from sub-ppb levels up to 100ppm.The Model 42i is a single Chamber, single photomultiplier tube design that cycles between the NO and NOX modes. The 42i has independent outputs for NO, NO2, and Nox and each can be calibrated separately. Dual range and Auto range are standards features as well. If required, the instrument can be operated continuously in either the NO or NOX modes allowing for response times of less than 5 seconds. This state-of-the-art gas analyzer offers features such as an Ethernet port as well as flash memory for increased data storage.
Model 55C Direct Methane, Non-Methane Analyzer
Direct measurement always produces the most precise result. That’s why the Thermo Environmental Instruments’ Model 55C Methane, Non-Methane hydrocarbon Analyzer is designed to provide a direct measurement of both methane and non-methane Hydrocarbon (NMHCs). Unlike instruments that use scrubbers or catalysts to measure only methane and total hydrocarbons, the Model 55C back-flushed gas chromatography system allows reliable measurements of NMHCs at sub-ppm concentrations, even in the presence of much higher concentrations of methane.
Model 450CPulsed Fluorescence H2S-SO2 Analyzer
The Fluorescence H2S-SO2 Analyzer provides continuous monitoring, superior zero stability and is self contained. Simultaneous readings of H2S and SO2 are provided on a local display and via analog and serial outputs. Minimum detectable concentrations are achieved through the superior optical system in this highly reliable instrument. From refineries to land fills, the Model 450C is the only choice to meet your continuous monitoring needs. The long proven pulsed fluorescent design of this instrument provides the most reliable data capture in its field.
Model 111 Zero Air Supply
The Thermo Environmental Model 111 Zero Air Supply is a convenient system for the generation of pollutant free "zero" gas for NO-NOX-O3-SO2-CO and hydrocarbon requirements. The Model 111 uses an external compressor; the pressure regulators, chemical scrubbers, reactor and temperature controller are all contained in a single convenient case. The Model 111 has been designed for any application where pollutant free levels of NO- NOX-O3-SO2-CO and hydrocarbons are required, with flows up to 20 liters per minute at pressure of 30 psi.
Model 49i-PS Ozone Primary Standard
The new iSeries platform delivers on all counts – and then goes a step farther. One of the critical calibration accessories in Thermo’s new iSeries product line is the Model 49i-PS O3 primary standard. Using UV Photometric technology, the Model 49i-PS is able to produce ozone at a rate of up to 5000 ppb. The Model 49i-PS is a dual cell photometer, the concept adopted by the NIST for the national ozone standard. The Model 49i-PS can operate with ozonator flow rates of up to 6 liters a minute. Because the instrument has both sample and reference flowing at the same time a response time of 20 seconds can be achieved.
Features
Model 41c Trace Level Gas Filter Correlation Analyzer Co2
The Model 41C Trace Level Gas Filter Correlation (GFC) CO2 Analyzer measures sub ambient levels of CO2 concentrations. It combines proven detection technology, easy to use menu-driven software, and advanced diagnostics to offer unsurpassed flexibility and reliability. The Model 41C Trace Level is based on the principle that carbon dioxide (CO2) absorbs infrared radiation. Because infrared absorption is a nonlinear measurement technique, it is necessary for the instrument electronics to transform the basic analyzer signal into a linear output. The analyzer uses an exact calibration curve to accurately linearize the instrument output over any range up to a concentration of 2000 ppm.
Source Emission
Source Emission Monitoring TEOM® Series 4200 Combustion Efficiency Monitor The TEOM Series 4200 Combustion Efficiency Monitor (CEM) provides the data necessary to optimize combustion efficiency in real time. This industrially hardened analyzer accomplishes its task by automatically measuring the amount of residual carbon in fly ash, and makes this information available to plant personnel. The carbon in ash test performed by the monitor is similar to methods carried out in plant laboratories. Carbon-in-ash is a key indicator of combustion efficiency at coal-fired power plants. The Series 4200 monitor provides a direct, efficient approach to automating this type of measurement through its sampling and analysis procedures. The sampling of particulate matter from the flue is performed isokinetically. Features: Industrially hardened Continuous, automatic operation Isokinetic sampling system Supports many data output protocols Built in diagnostics and self-tests Modular design for ease of maintenance Transportable Built-in two point sampling capability Pneumatically driven sampling and analysis systems eliminate external, mechanical pumps. TEOM® Series 7000 Source Particulate Monitor The TEOM Series 7000 Source Particulate Monitor provides an integrated approach to stack particulate sampling and monitoring by generating immediate results at a high level of quality assurance. Like traditional stack particulate sampling methods, the device determines the flue velocity, collects particles isokinetically on a filter, and performs a direct measurement of their mass. The dependence of measurement results upon individual operators is substantially reduced through automated computations of moisture content, molecular weight and flue velocity. The monitor also ensures high-quality mass concentration determinations through a dynamic isokinetic sampling scheme that automatically adjusts to changes in source gas conditions. Model 43i-HL High Level SO2 Analyzer A major product in Thermo’s new iSeries product line is the Model 43i-HL SO2 analyzer. Using pulsed florescence technology, the Model 43i-HL SO2 measures the amount of sulfur dioxide in the air from sub ppm levels up to 1,000 ppm in standard range mode and from 100 ppm up to 10,000 ppm in extended range. Dual range and auto range are standard features in this instrument as well as temperature and pressure correction. User settable alarm levels for concentration and for a wide variety of internal diagnostics are available from an easy to follow menu structure. Features: Ethernet connectivity for efficient remote access Enhanced user interface with one button programming and large display screen Flash memory for increased data storage and user downloadable software Enhanced electronics design optimizes product commonality Improved layout for easier accessibility to components
TEOM® Series 4200 Combustion Efficiency Monitor
The TEOM Series 4200 Combustion Efficiency Monitor (CEM) provides the data necessary to optimize combustion efficiency in real time. This industrially hardened analyzer accomplishes its task by automatically measuring the amount of residual carbon in fly ash, and makes this information available to plant personnel. The carbon in ash test performed by the monitor is similar to methods carried out in plant laboratories. Carbon-in-ash is a key indicator of combustion efficiency at coal-fired power plants. The Series 4200 monitor provides a direct, efficient approach to automating this type of measurement through its sampling and analysis procedures. The sampling of particulate matter from the flue is performed isokinetically.
TEOM® Series 7000 Source Particulate Monitor
The TEOM Series 7000 Source Particulate Monitor provides an integrated approach to stack particulate sampling and monitoring by generating immediate results at a high level of quality assurance. Like traditional stack particulate sampling methods, the device determines the flue velocity, collects particles isokinetically on a filter, and performs a direct measurement of their mass. The dependence of measurement results upon individual operators is substantially reduced through automated computations of moisture content, molecular weight and flue velocity. The monitor also ensures high-quality mass concentration determinations through a dynamic isokinetic sampling scheme that automatically adjusts to changes in source gas conditions.
Model 43i-HL High Level SO2 Analyzer
A major product in Thermo’s new iSeries product line is the Model 43i-HL SO2 analyzer. Using pulsed florescence technology, the Model 43i-HL SO2 measures the amount of sulfur dioxide in the air from sub ppm levels up to 1,000 ppm in standard range mode and from 100 ppm up to 10,000 ppm in extended range. Dual range and auto range are standard features in this instrument as well as temperature and pressure correction. User settable alarm levels for concentration and for a wide variety of internal diagnostics are available from an easy to follow menu structure.
Oxygen Non Invasive Monitoring
Oxygen Analyzers O2xySense™ 210T Oxygen Analyzer System The O2xySense™ 210T Oxygen Analyzer system utilizes a non-invasive optical methodology and the O2xyDot™, a separate fluorescent oxygen-sensitive sensor to measure oxygen concentration. The O2xySense™ 210T is ideally suited for use in Research & Development and Quality Control programs. It is an easy, accurate, and low-cost method for conducting leak testing of modified atmosphere packaging (MAP), vacuum packaging, oxygen scavenging, closure seal, PET bottle and product shelf-life studies. Other O2xySense™ models are available to support multiple sensor heads and harsher environments (such as the manufacturing floor). Features: Non-destructive measurements Repeatable and reproducible measurements in real time using the same package or bottle Measures oxygen in the headspace and dissolved in the liquid Automatic data logging Integrated temperature compensation Operator-friendly software interface Can be used in oil, water and air Independent of pH and Salt Does not consume Oxygen O2xySense™ 4000B Portable Oxygen Analyzer The O2xySense™ 4000B Oxygen Analyzer utilizes a non-invasive optical methodology and the O2xyDot™, a separate fluorescent oxygen sensitive sensor to measure oxygen concentration. The O2xySense™ 4000B is ideally suited for Research & Development and Quality Assurance programs. It is an easy to use and accurate method for conducting permeation tests, shelf life studies and leak testing of modified atmosphere packaging (MAP), vacuum packaging, oxygen scavenging, closure seal, PET bottle and product shelf-life studies. The O2xySense™ 4000B’s portability makes it perfect for multiple location testing programs. Features: Non-destructive measuring technique Measures oxygen in the headspace and dissolved in the liquid in the same package Automatic data logging Measures in liquids and gases Integrated temperature compensation Operator-friendly software interface Highly Portable Can be used in oil, water and air Independent of pH and Salt
O2xySense™ 210T Oxygen Analyzer System
The O2xySense™ 210T Oxygen Analyzer system utilizes a non-invasive optical methodology and the O2xyDot™, a separate fluorescent oxygen-sensitive sensor to measure oxygen concentration. The O2xySense™ 210T is ideally suited for use in Research & Development and Quality Control programs. It is an easy, accurate, and low-cost method for conducting leak testing of modified atmosphere packaging (MAP), vacuum packaging, oxygen scavenging, closure seal, PET bottle and product shelf-life studies. Other O2xySense™ models are available to support multiple sensor heads and harsher environments (such as the manufacturing floor).
O2xySense™ 4000B Portable Oxygen Analyzer
The O2xySense™ 4000B Oxygen Analyzer utilizes a non-invasive optical methodology and the O2xyDot™, a separate fluorescent oxygen sensitive sensor to measure oxygen concentration. The O2xySense™ 4000B is ideally suited for Research & Development and Quality Assurance programs. It is an easy to use and accurate method for conducting permeation tests, shelf life studies and leak testing of modified atmosphere packaging (MAP), vacuum packaging, oxygen scavenging, closure seal, PET bottle and product shelf-life studies. The O2xySense™ 4000B’s portability makes it perfect for multiple location testing programs.
Gas Detection and Monitoring
Fixed Monitoring Systems 4800 Controller The 4800 Controller is an analog/digital input/output system controller with remote dial out and access capabilities. The base unit consists of a micro-controller with display; modem, AC and phone line surge protection and 24-hour battery back up. A maximum number of 72 channels can be used; however the maximum number of modules (input and output) can not exceed 6 in any combination. Industrial Scientific recommends that a fixed system application survey be completed to help provide the most accurate assessment of your equipment requirements. Features: 8 - 48 analog inputs Up to 72 digital ModBus inputs Programmable relay outputs Telephone alarm notification 1,000 entry event log ModBus master or slave device Printer interface Independent relay activation Easy channel configuration Remote telephone dial-up capabilities iTrans Fixed Point Monitors iTrans offers a wide variety of sensor configurations and relay options for maximum flexibility and affordability. Use the following guide to select the options that best fit our monitoring needs and applications. Industrial Scientific recommends that a fixed system application survey be completed to help provide the most accurate assessment of your equipment requirements. iTrans also offers a relay deactivation feature to prevent accidental alarm activation during calibrations. The units also feature simple non-intrusive calibration, ultra-bright LED display, programmable alarms and on-board sensor life indicators. RS5100 Carbon Monoxide Monitor Industrial Scientifics’ RS5100 Carbon Monoxide monitor is an exceptionally accurate fixed-point monitor designed for even the toughest industrial worksites. Features include an extra-large LED display and optional Banshee audible alarm and strobe lights to ensure the entire area is alerted should the atmosphere exceed alarm levels. Typical applications may include parking garages, warehouses, baking facilities, steel mills or anywhere else carbon monoxide may accumulate. All parts are encased within the monitor’s 16-gauge steel housing. An internal lamp is activated when the enclosure is opened, providing visibility to the calibration controls in dark areas. All controls have been enlarged for easier access, simplifying the calibration process. The RS5100 utilizes a plug-in electrochemical sensor which is housed in a stainless steel cover, protecting the sensor from harsh environments. Features: Rugged and reliable Easy-to-read, large LED display Steel construction Optional lights and horns Measures CO from 0 - 1999 ppm Portable Multi-Gas Instruments MG140 Four-Gas Monitor The MG140 is designed to be a reliable, low cost gas monitoring solution in applications where the flexibility of a full featured multi gas monitor is not required. The MG140 continuously monitors the air and displays the concentration of oxygen, combustible gas, carbon monoxide and hydrogen sulfide. A 90 dB audible alarm and ultra-bright visual alarm alert the user if gas concentrations have exceeded the preset limits. A high visibility, enamel coated stainless steel case provides the MG140 with the durability found in every gas monitor carrying the Industrial Scientific label. The MG140 instrument and SP100 sampling pump carry a full two year warranty. Portable Single-Gas Instruments VX500 PhotoIonization Detector The VX500 PhotoIonization Detector (PID) provides the ultimate flexibility in portable detection of volatile organic compounds (VOCs). The VX500 utilizes a field-replaceable, plug-in detector and an interchangeable 10.6 eV lamp to monitor potentially hazardous compounds including benzene, toluene, xylene, and vinyl chloride at levels as low as 100 parts per billion (ppb). The VX500 also offers simple one-button calibration, TWA and STEL readings with peak/hold memory, and a time delay power button to prevent unintentional monitor shut-off. Data logging features include memory for up to 1,800 readings, iButton® data input, and customizable data recording intervals between one second to five minutes. The VX500 is also Docking StationTM compatible for complete utilization of the system’s automatic calibration and record-keeping functions and is backed by Industrial Scientifics’ “Guaranteed for Life” warranty. LKD100 Combustible Gas Leak Detector Combining low-cost, reliable protection with maintenance-free operation, the LKD100 Combustible Gas Leak Detector offers continuous detection of natural gas (methane) leaks. The LKD100 sounds an audible alarm when the combustible gas concentration exceeds the preset level of 500 ppm. The unit will also allow the user to manually customize the alarm pre-sets for specific monitoring needs. The LKD100 is designed to fit comfortably in a shirt pocket or tool belt and is available in either a rechargeable NiMH version or with a “AA” alkaline battery. Utilizing a long-life, solid state sensor which requires no calibration, the LKD100 is an ideal, low-cost monitoring solution for any-one who may encounter or need to check for gas leaks during the course of their day, including plumbers, or police, fire, utility and HVAC personnel. The leak detector is UL approved for use in Class I, Div 2 hazardous locations.
4800 Controller
The 4800 Controller is an analog/digital input/output system controller with remote dial out and access capabilities. The base unit consists of a micro-controller with display; modem, AC and phone line surge protection and 24-hour battery back up. A maximum number of 72 channels can be used; however the maximum number of modules (input and output) can not exceed 6 in any combination. Industrial Scientific recommends that a fixed system application survey be completed to help provide the most accurate assessment of your equipment requirements.
iTrans Fixed Point Monitors
iTrans offers a wide variety of sensor configurations and relay options for maximum flexibility and affordability. Use the following guide to select the options that best fit our monitoring needs and applications. Industrial Scientific recommends that a fixed system application survey be completed to help provide the most accurate assessment of your equipment requirements.
iTrans also offers a relay deactivation feature to prevent accidental alarm activation during calibrations. The units also feature simple non-intrusive calibration, ultra-bright LED display, programmable alarms and on-board sensor life indicators.
RS5100 Carbon Monoxide Monitor
Industrial Scientifics’ RS5100 Carbon Monoxide monitor is an exceptionally accurate fixed-point monitor designed for even the toughest industrial worksites. Features include an extra-large LED display and optional Banshee audible alarm and strobe lights to ensure the entire area is alerted should the atmosphere exceed alarm levels. Typical applications may include parking garages, warehouses, baking facilities, steel mills or anywhere else carbon monoxide may accumulate. All parts are encased within the monitor’s 16-gauge steel housing. An internal lamp is activated when the enclosure is opened, providing visibility to the calibration controls in dark areas. All controls have been enlarged for easier access, simplifying the calibration process. The RS5100 utilizes a plug-in electrochemical sensor which is housed in a stainless steel cover, protecting the sensor from harsh environments.
MG140 Four-Gas Monitor
The MG140 is designed to be a reliable, low cost gas monitoring solution in applications where the flexibility of a full featured multi gas monitor is not required. The MG140 continuously monitors the air and displays the concentration of oxygen, combustible gas, carbon monoxide and hydrogen sulfide. A 90 dB audible alarm and ultra-bright visual alarm alert the user if gas concentrations have exceeded the preset limits. A high visibility, enamel coated stainless steel case provides the MG140 with the durability found in every gas monitor carrying the Industrial Scientific label. The MG140 instrument and SP100 sampling pump carry a full two year warranty.
VX500 PhotoIonization Detector
The VX500 PhotoIonization Detector (PID) provides the ultimate flexibility in portable detection of volatile organic compounds (VOCs). The VX500 utilizes a field-replaceable, plug-in detector and an interchangeable 10.6 eV lamp to monitor potentially hazardous compounds including benzene, toluene, xylene, and vinyl chloride at levels as low as 100 parts per billion (ppb).
The VX500 also offers simple one-button calibration, TWA and STEL readings with peak/hold memory, and a time delay power button to prevent unintentional monitor shut-off. Data logging features include memory for up to 1,800 readings, iButton® data input, and customizable data recording intervals between one second to five minutes. The VX500 is also Docking StationTM compatible for complete utilization of the system’s automatic calibration and record-keeping functions and is backed by Industrial Scientifics’ “Guaranteed for Life” warranty.
LKD100 Combustible Gas Leak Detector
Combining low-cost, reliable protection with maintenance-free operation, the LKD100 Combustible Gas Leak Detector offers continuous detection of natural gas (methane) leaks. The LKD100 sounds an audible alarm when the combustible gas concentration exceeds the preset level of 500 ppm. The unit will also allow the user to manually customize the alarm pre-sets for specific monitoring needs. The LKD100 is designed to fit comfortably in a shirt pocket or tool belt and is available in either a rechargeable NiMH version or with a “AA” alkaline battery. Utilizing a long-life, solid state sensor which requires no calibration, the LKD100 is an ideal, low-cost monitoring solution for any-one who may encounter or need to check for gas leaks during the course of their day, including plumbers, or police, fire, utility and HVAC personnel. The leak detector is UL approved for use in Class I, Div 2 hazardous locations.
IDS Emergency Management | IDS Water | IDS Publishing / Media | IDS Healthcare Management | IDS Packaging | IDS Plastics | IDS Power/Energy
Industry IDS, Inc. – Online Tradeshow, Exhibition, & Buyers Guide Solutions
