The J.U.M. Engineering HFID Model 3-800 is a portable very compact heated total hydrocarbon analyzer for high accuracy, sensitivity and stability. Fully complies with EN 12619, EN 13526 (EU), 2. BImSchV. 13. BImSchV and 17. BImSchV (Germany), and EPA Method 25A and Method 503 (USA)

The Model 3-800 uses a hydrogen flame ionization detector (FID) in a heated oven to prevent the loss of high molecular weight hydrocarbons and to provide very reliable performance in the analysis of trace level of contaminants in emissions, gases, air and other gases.

The single use heated sample filter is easily accessible from the rear panel and no special tools required for a quick and easy sample filter change. All sample wetted components are integrated into the heated chamber.

Low cost of ownership. Very low fuel gas consumption. The combustion air supply for the FID-detector is already built in. No external burner air generator or external cylinder for synthetic burner air is needed.

Features

- Easy to change sample filter accessible on the rear panel. No special tools required for filter
change
- Built in burner air generator, no external air cylinder needed
- All components in contact with sample fully heated and controlled at 190°C
- Built-in sample pressure and sample pumps
- Separate solenoid valves for zero- and span calibration, standard manual and remote
operation
- Automatic flame out control
- Fast response within 1 second
- Low fuel consumption
- Very selective
- Microprocessor controlled. PID-type temperature controller
- Automatic range change optional

Applications

- Stack gas hydrocarbon emissions monitoring
- Fence line monitoring
- Raw exhaust vehicle emissions analysis
- Catalytic converter testing
- Measuring engine combustion efficiency
- Hydrocarbon contamination monitoring in air and other gases
- Carbon adsorption regeneration control
- Detection of trace hydrocarbons in purity gases used in the semi conductor industry
- LEL monitor of solvent laden air